Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I have a wooden coffee table that has been varnished but not stained. I want to paint it.
!. can I paint over the varnish?
2. if I can't how much of the varnish must I remove?
3. Will a quick rub down with glass paper be enough or does it all have to be removed?
4. If it all has to be removed where can I buy a sander?
5. When the table has been prepared for painting I want to do it in a paint that isn't shiny. A matt finish is required. Can I buy paint for wood that is matt?
Cannot help you with the technical advice, but the best place I've found for buying tools in Luxor is Naseem Salama's. It's next to the Horus Hotel directly opposite the big Mosque behind Luxor Temple. Commonly known amongst many foreigners as the underground shop (it's down about 8 stairs from the street) or B&Q.
It's a Christian shop with fixed prices, although not labelled, and the managers sit at a desk in the middle and speak good English. But be careful, as there are may hazards once you get in there! They sell everything from the tiniest nails and screws to great big shackles for ships anchors, and bubble wrap! I could easily spend hours rummaging around in there. (And would LOVE to just now!!)
Carrie, I know nothing really re your questions other than I believe Chalk Paint is a popular non shine paint used on wood, and is quite popular in the trend of upcycling furniture. I understand it can be bought in tins - but in Luxor I have even less of a clue - but can also be made by yourself from online recipes.
I base my knowledge above from snippets on the internet and recycle/upcycle programmes. It may be worth you lookinv it up online to see if it's suitable to your needs.
Experience is not what happens to you;
it is what you do with what happens to you.
-Aldous Huxley
Oh Teddyboy I love that shop, they look at me when I go in as if to say "oh it's her again" then let me rummage round. All the little rooms with millions of drawers. I never know what things are called half the time in English let alone Arabic.
Once or twice I have gone in with a drawing of what I want, not a lot of success there.
Unfortunately I have been 3 times in the past two weeks and each time they have been closed.
On asking, one person said it was only open in the evening now, another that it had closed down. I will continue to look when I am passing.
Someone told me that there is a tool shop not far from your home but on the main drag, I know where they mean but is it any good?
Thank you Hepzibah I will check it out.
Carrie, for my own curiosity, after making my earlier post I had a quick search on line for 'Chalk Paint' . It came up with a lot of images of various brands, samples of furniture painted in it; How to Use; How to Make; and all sorts of other information but I had no time to look any further.
Experience is not what happens to you;
it is what you do with what happens to you.
-Aldous Huxley
Carrie, if you stand looking into our alley, there's a tool man on the left, just a door or two away with two little shops. He's fine, and that's all he sells. It's so long since we've been home (in Luxor, I mean) that I cannot recall his name. Tell him that I recommended you. He's about 30/35, good looking (probably) with glasses. There's also another, just into Gold Street, on the left, called Rubi, but he always tries to take the proverbial out of me, pricewise. Even though he carries a much more wide ranging stock, I stopped dealing with him.
If it's any help, the Arabic word for an electric sander is the same as for a (military) tank. I'd give it to you phonetically, but I've forgotten that as well! Absence doesn't make the heart grow, it just makes your brain go numb.
carrie wrote: Mon Feb 22, 2021 8:20 am
I have a wooden coffee table that has been varnished but not stained. I want to paint it.
!. can I paint over the varnish?
2. if I can't how much of the varnish must I remove?
3. Will a quick rub down with glass paper be enough or does it all have to be removed?
4. If it all has to be removed where can I buy a sander?
5. When the table has been prepared for painting I want to do it in a paint that isn't shiny. A matt finish is required. Can I buy paint for wood that is matt?
Carrie, give it a light sanding first, wipe off with a damp clothe then apply 1 coat of white undercoat. This is readily found in paint shops, sometimes they call it number 1 coat, number 2 being the gloss. This paint is very thick, a bit like your average male, so you need to buy a small thinner and start stairing until your wrist goes numb. There are no Matt finish paints sold here apart from black and white as far as I know, but, the undercoat can be made to whatever colour you want by mixing into it the small plastics bottles of colour add, 6Le each. You may need 2/4 of these to obtain the shade you need, and only buy a small undercoat for the job, larger if your table is a big one. Newcastle, I would of appreciated being asked first before you published a family picture, but that, I guess, is like expecting a miracle from you. ;-)
Life is your's to do with as you wish- do not let other's try to control it for you. Count Dusak- 1345.
Can you imagine how many trolls will flood this? :D
YOU CAN NOW ASK PRESIDENT EL-SISI DIRECT QUESTIONS ONLINE WHICH HE'LL ANSWER HIMSELF
The mind-boggling initiative was launched yesterday by The...
Last post
No point taking up the offer, the two sisters will overload the server. :lol: and all the other numties that want answers to their My Mohamed queries, visa complaints and why did my friend Doris get...
A 7000 page investigations document of the violence that took place at the Presidential Palace in December 2012 revealed a prosecutor’s attempt to interrogate deposed President Mohamed Morsy at his...
Last post
His English was probably not so good :lol:
The fact that his Ph.D. from USC was on high-temperature electrical conductivity and defect structure of donor-doped Al2O3, and that he was a professor...